Ubiquiti Networks launches the second generation of airMAX® CPE (Customer Premises Equipment), the LiteBeam® 5AC Gen 2, with dedicated Wi-Fi management.

The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.

Ubiquiti's InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the LiteBeam 5AC Gen 2 is versatile and cost-effective to deploy.

The second generation devices work under airOS® v8 software - the revolutionary operating system for Ubiquiti® airMAX ac products.

Dimensions 358 x 271.95 x 272.5 mm (14.09 x 10.71 x 10.73")

Weight

 Without Mount

 With Mount

800 g (1.76 lb)

980 g (2.16 lb)

Power Supply 24V, 0.3A Gigabit PoE Adapter (Included)

Max. Power Consumption 7W

Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return)

Supported Voltage Range 24V ± 10%

Gain 23 dBi

Networking Interface (1) 10/100/1000 Ethernet Port

Processor Specs MIPS 74Kc

Memory 64 MB DDR2

LEDs Power, Ethernet

Channel Sizes PtP Mode PtMP Mode

10/20/30/40/50/60/80 MHz 10/20/30/40 MHz

Enclosure Characteristics Reflector (SGCC 0.6T) / Plastic: PC

Mounting Pole-Mounting Kit (Included)

Wind Loading 275 N @ 200 km/h (61.8 lbf @ 125 mph)

Wind Survivability 200 km/h (125 mph)

ESD/EMP Protection ± 24 kV Contact / Air

Operating Temperature -40 to 70° C (-40 to 158° F)

Operating Humidity 5 to 95% Noncondensing

Certifications CE, FCC, IC